Crêpe & Galette Craft

The whole Beginner level is free. Intermediate and Professional unlock for a one-time $29 each.

Sign up free
Lesson 3 of 7

Equipment: Plates, Spreaders and Spatulas

Equipment: Plates, Spreaders and Spatulas

⏱ About 2 min read

⚡ In 30 seconds

  • Plate at about 200–230 °C
  • Soak the T-spreader in water between uses
  • Long, thin spatula for flipping
  • Thin film of fat; re-season every few crêpes
  • One measured ladle per crêpe

Crêpe plate (billig): a flat round cast-iron or steel griddle, usually 35–40 cm, gas or electric. A good non-stick pan works at home but is slow for service.

Temperature: around 200–230 °C. Too cool = pale and rubbery; too hot = batter sets before it spreads.

T-spreader (râteau): a wooden T used to spread batter in a thin, even circle. Keep it soaking in a jug of water between uses so batter doesn't stick.

Spatula (spatule): a long, thin, flexible blade for lifting and flipping.

Seasoning: wipe the plate with a thin film of oil or clarified butter using a folded cloth or a cut potato-and-oil pad. Re-season lightly every few crêpes.

Use a ladle that holds exactly one crêpe's worth — usually 60–80 ml for a 35–40 cm plate.

🏪 Real Café Scenario

A café switched from two pans to one electric crêpe plate and doubled output with the same staff.

Try this today

Mark the ladle level with tape. New staff then pour the right amount from day one.

Previous